CTM Potters Supplies - if you use clay you need CTM

Doncaster Tel: 01709 770801

Simba Materials Limited t/a

CTM Potters Supplies Co Reg No 05659119

   Doncaster Fax : 01709 770803

doncaster@ctmpotterssupplies.co.uk     Unit 8 Broomhouse Lane Industrial Estate, Edlington, Doncaster DN12 1EQ

Delivery charges and VAT will be added on to all orders. Prices on this website and in all downloads are net of VAT. Prices are subject to change without notice.

Exeter Tel: 01395 233077

   Exeter Fax : 01395 233905

admin@ctmpotterssupplies.co.uk            Unit 19 Hogsbrook Units,Greendale Ind Estate EAST, White Cross Road, Woodbury Salterton, Exeter EX5 1PY

All prices are in GBP - often per kg - and need delivery and VAT to be added. For some items there are pictures or more information if you press on the link. You can order by email, phone, fax but but you cannot pay online - please see ORDERING

Please Note

Kiln Shelves and Supports

  • KS10           Circular
  • 11 3/8" x 3/8" Batt
  • 289 mm x 10 mm
  • £10.75 each + VAT
  • KS11            Circular
  • 13" x 3/8"       Batt
  • 330.2 mm x 10 mm
  • £12.95  each + VAT


  • KS11B           Circular
  • 13 3/4" x 3/8"   Batt
  • 350 mm x 10 mm
  • £16.35  each + VAT

Rohde 43L / Nab Top 45 / Kittec CB40

  • KS12            Circular
  • 14 1/2" x 3/8"  Batt
  • 368.3 mm x 10 mm
  • £18.35  each + VAT


  • KS13           Circular
  • 16 1/2" x 5/8"  Batt
  • 419.1 mm x 16 mm
  • £28.90  each + VAT
  • KS13C        Circular
  • 18 7/8" x 5/8"     Batt
  • 479.4 mm x 16 mm
  • Two flat edges/sides
  • £30.90 each + VAT
  • KS14         Circular
  • 21" x 3/4"     Batt
  • 533.4 mm x 19 mm
  • £40.05 each + VAT
  • KS15            Circular
  • 23" x 3/4"        Batt
  • 584.2 x 19 mm
  • £42.30  each + VAT
  • KS16          Circular
  • 26 1/2" x 3/4"   Batt
  • 673.1 x 19 mm
  • £47.75  each + VAT



Shelves above 19" are collect or pallet delivery only


See below for Batt Wash

  • KS20    Semi-Circular
  • 13" x 3/8"       Batt
  • 330.2 mm x 10 mm
  • £8.78 each + VAT
  • £15.96 pair + VAT


  • KS21    Semi-Circular
  • 14 1/2" x 3/8"  Batt
  • 368.3 mm x 10 mm
  • £11.74 each + VAT
  • £21.35 pair + VAT
  • KS22    Semi-Circular
  • 16 1/2" x 5/8"  Batt
  • 419.1 mm x 16 mm
  • £17.55  each + VAT
  • £31.90 pair + VAT
  • KS23    Semi-Circular
  • 21" x 3/4"       Batt
  • 533.4 mm x 19 mm
  • £23.68  each + VAT
  • £43.06 pair + VAT
  • KS24    Semi-Circular
  • 23" x 3/4"       Batt
  • 584.2 mm x 19 mm
  • £24.91  each + VAT
  • £45.30 pair + VAT
  • KS25    Semi-Circular
  • 26 1/2" x 3/4"  batt
  • 673.1 mm x 19 mm
  • £27.92  each + VAT
  • £50.76 pair + VAT
  • KS30    Rectangular
  • 12" x 12" x 1/2"
  • 304.8 x 304.8 x 12.7 mm
  • £14.16 each + VAT
  • KS31     Rectangular
  • 14" x 14" x 5/8"
  • 355.6 x 355.6 x 16 mm
  • £21.24 each + VAT
  • KS32    Rectangular
  • 17" x 11 3/4" x 3/4"
  • 431.8 x 298.4 x 19 mm
  • £28.75 each + VAT
  • KS33   Rectangular
  • 18" x 12" x 3/4"
  • 457.2 x 304.8 x 19 mm
  • £26.20 each + VAT
  • KS34    Rectangular
  • 17" x 17" x 3/4"
  • 431.8 x 431.8 x 19 mm
  • £33.82  each + VAT


  • KS36     Rectangular
  • 21" x 21" x 5/8"
  • 533.4 x 533.4 x 16 mm
  • £46.77 each + VAT
  • KS35    Rectangular
  • 26" x 26" x 3/4"
  • 660.4 x 660.4 x 19 mm
  • £68.32 each + VAT
  • KF34      Tile Crank
  •  6" x 6" Tile Setter
  • 4 legged tile crank
  • 15 tiles high
  • £31.00 each + VAT



  • KF35      Tile Crank
  •  4" x 4" Tile Setter
  • 4 legged tile crank
  • 15 tiles high
  • £31.00 each + VAT



  • KF36   
  •  Crank Cement
  • semi-permanent cement
  • £6.57 + VAT per 500 gm lot


  • BW Batt Wash  
  •  powder to mix to a paste to put on shelves to act as a protective layer - needs bisque firing
  • 500 gm £3.59 + VAT
  • 1 kg £5.98 + VAT
  • 2 kg £10.14 + VAT
  • 5 kg £21.50 + VAT


  • KS60   Small
  • Bead Firing Stand
  • 105L x 60W x 90H mm
  • 1050oC - no soak
  • £14.40 each + VAT


  • KS61   Medium
  • Bead Firing Stand
  • 160L x 60W x 115H mm
  • 1050oC - no soak
  • £16.90 each + VAT


  • KS62   Large
  • Bead Firing Stand
  • 160L x 80W x 135H mm
  • 1050C - no soak
  • £19.30 each + VAT


Designed for beads but can take a few hanging items on each bar - recommend high biscuit and then using the rods low glaze fire. Recommend under 1110oC no soak. If have to go past put on low weights and fire quickly once past 1000oC and no soak


Although we do not recommend firing to 1200oc - we have customers who do so without a soak and although they get a little bending they say the bars do cope.

  • KS80        Stand
  • 1 x 4 mm hole
  • refractory block
  • 33 x 33 x 15 mm
  • £4.18 each + VAT


  • KS81        Stand
  • 3 x 4 mm holes
  • refractory block
  • 33 x 33 x 15 mm
  • £4.18 each + VAT


  • KS82        Stand
  • 3 x 4 mm holes
  • refractory block
  • 60 x 60 x 15 mm
  • £6.24 each + VAT


  • KS83        Stand
  • 5 x 4 mm holes
  • refractory block
  • 170 x 25 x 15 mm
  • £7.08 each + VAT
  • KS65   Round Bar
  • 150 x 2 mm Metal
  • £1.16 each + VAT
  • £1.10 ea + VAT mix 3+
  • KS66   Round Bar
  • 200 x 2 mm Metal
  • £1.27 each + VAT
  • £1.21 ea + VAT mix 3+


  • KS67   Round Bar
  • 150 x 3 mm Metal
  • £1.43 each + VAT
  • £1.36 ea + VAT mix 3+


  • KS68   Round Bar
  • 200 x 3 mm Metal
  • £1.74 each + VAT
  • £1.65 ea + VAT mix 3+


  • KS69   Round Bar
  • 60 x 4 mm Metal
  • £1.37 each + VAT
  • £1.30 ea + VAT mix 3+
  • KS71   Round Bar
  • 100 x 4 mm Metal
  • £1.90 each + VAT
  • £1.81 ea + VAT mix 3+
  • KS73   Round Bar
  • 200 x 4 mm Metal
  • £2.59 each + VAT
  • £2.46 ea + VAT mix 3+
  • KS75   Round Bar
  • 300 x 4 mm Metal
  • £3.59 each + VAT
  • £3.41 ea + VAT mix 3+
  • KS77   Round Bar
  • 500 x 4 mm Metal
  • £4.86 each + VAT
  • £4.62 ea + VAT mix 3+


Although we do not recommend firing to 1200oc - we have customers who do so without a soak and although they get a little bending they say the bars do cope.

We strongly recommend supporting the firing stand bars and the 2 mm  and 3 mm "Round Bars" every 50mm or so.  Do not soak below 1100oC as the metal will be at a transition temperature and will bend.

Delivery Charges

For props, stilts, extension props, controllers, pyrometers, thermocouples, orton cones etc - go to

REFRACTORY/FIRING


At a small charge we can cut down from any of the square / rectangular shelves but cannot cut down circular batts.    We can get other sizes, but to get our usual good price we would need 3 months advance notice at least.


We sometimes have odd sizes in (i.e. 14” x 11” or 10 1/2” circular) so it is worth asking.

PRICE LIST

BROWSE - RING or EMAIL

We will price it up for you. Pay over the phone or you can do a bank transfer!