Doncaster Tel: 01709 770801

Simba Materials Limited t/a

CTM Potters Supplies Co Reg No 05659119

   Doncaster Fax : 01709 770803

doncaster@ctmpotterssupplies.co.uk     Unit 8 Broomhouse Lane Industrial Estate, Edlington, Doncaster DN12 1EQ

Delivery charges and VAT will be added on to all orders. Prices on this website and in all downloads are net of VAT. Prices are subject to change without notice.

Exeter Tel: 01395 233077

   Exeter Fax : 01395 233905

admin@ctmpotterssupplies.co.uk            Unit 19 Hogsbrook Units,Greendale Ind Estate EAST, White Cross Road, Woodbury Salterton, Exeter EX5 1PY

All prices are in GBP - often per kg - and need delivery and VAT to be added. For some items there are pictures or more information if you press on the link. You can order by email, phone, fax but but you cannot pay online - please see ORDERING

Please Note

Sculpting Starter Kits

SC Starter Kit A     £40.00 + VAT = £48.00

Suggested Clay A  £6.21 + VAT   = £7.45

Suggested Clay B  £10.27 + VAT   = £12.32

Total Kit Price       £56.48 + VAT = £67.78

Plus delivery if not collected

We stock a wide range of cost effective tools, brushes and equipment from Germany, Spain, Taiwan, USA and made in the UK for hobbyist, professional and schools. We buy in bulk so often have very good prices.

Sculpting Starter Kit A

• T1010 Tool Roll £5.50
• T1003 Clean Up Tool Set £10.50
• T183 Serrated Triangle Sculpturing Tool £3.44
• T184 Serrated Pear Sculpturing Tool £3.44
• T185 Serrated Offset Sculpturing Tool £3.44
• C16 Clay Shredder £4.00
• T69 Clay Cutter, 24” Thick Wire £1.99
• T83 Square End, Turning Tool £3.05
• T84 Leaf End, Turning Tool £3.05
• T85 Half Round, Turning Tool £3.05
• T86 Point End, Turning Tool £3.05

List Price £44.51+ VAT = £53.41

Kit A Price £40.00 + VAT = £48.00

The largest 13 amp plug in kilns that we supply that fire to full stoneware (price includes shelves, controller):-

Rohde HIM-Ecotop 43 1320oC ST310 controller + 3 shelf set

New High Insulation Model

CTM Discounted GBP 2,928 incl VAT (40cm x 34cm deep)

Rohde HIM-Ecotop 60 1320oC ST310 controller + 4 shelf set

New High Insulation Model

CTM Discounted GBP 3,276 incl VAT (40cm x 34cm deep)

Nabertherm TOP 45/L 1300oc 5 programme controller + 3 shelf set

CTM Discounted Price £2,898 including VAT and delivery Areas 1-3

(41cm x 34cm deep)

Kilncare V61 IKON 1300oc 32 programme controller + 3 shelf set

CTM Price £3,420 including VAT and delivery Areas 1-3

(41cm x 45cm deep)

Optional pallet delivery is by tail lift vehicle to road side only.

Plug In Kilns

Suggested Starter Sculpting Clays

• Terracotta Sculpture Clay 1020-1220oC
• Light to Dark Red. Medium-Coarse. Open texture giving good plasticity and thermal shock resistance. Large sculptural work.
• 12.5 kg bag    List Price £7.03 + VAT

If added to Starter Kit the Price is £6.21 + VAT

• E/S 50 Crank 1160-1300oC
• Warm Buff to Orange. Coarse. Lime free grog provides clean uniform clay with excellent keying, warp resistance, low shrinkage and excellent green and fired strength.
• 12.5 kg bag    List Price £12.04 + VAT
• If added to Starter Kit the Price is £10.27 + VAT

Kit and both bags of clay at

special price £56.48 + VAT = £67.78

There are many other clays suitable for sculpting

We also recommend the new cost effective steel carving set :T1005 £10.55 + VAT = £12.66